Guides — honda

Honda Civic (1996 - 2000) Front Bumper

Quan Nguyen 发布

Honda Civic (1996 - 2000) Front Bumper

Here's how to remove the front bumper. here’s an overview of the screws you’ll be removing. Remove these 5 plastic screws. On the bottom of the bumper, you’ll see two bolts holding it to the frame. In each wheel well, right at the corner where the bumper meets the fender, there should be a screw holding them together. You’ll have to peel/pull back the wheel well plastic a bit to get at the screw. The bumper should now be free to be removed  

阅读详细内容 →

Honda Civic (1996 - 2000) Rear Bumper

Quan Nguyen 发布

Honda Civic (1996 - 2000) Rear Bumper

Here's how to remove the rear bumper. Remove the two screws on each side. The first one is right at the top of the side of each bumper. Remove the two clips on the underside of the bumper. Remove the 5 clips from the middle of the bumper. Pull.

阅读详细内容 →

Honda Accord (2020) Rear Bumper

Joni Pham 发布

Honda Accord (2020) Rear Bumper

Here's how to remove the rear bumper cover. 1. In wheel well, remove both mud flaps to remove the lower corner portion of the bumper.  2. Open trunk lid then locate the two T30 torx fasteners holding the top portion of the bumper to the trunk. 3. Underneath the trunk, remove two plastic fasteners. ONLY the two middle ones. 4. With all fasteners removed, start pulling the bumper cover away from the car body. Work your way around to the tail lights for both sides. Then lift up and pull away.

阅读详细内容 →

Honda Accord (2020) Front Bumper

Joni Pham 发布

Honda Accord (2020) Front Bumper

Prep: Open the hood and remove the upper grill cover. Here's how to remove the front bumper cover. Underneath the car, remove the plastic clips holding the bottom portion of the bumper to the car. Both right and left side edges, by the fender, remove the Philip screws. Final step is to first gently pull along the edges then away from the car.    

阅读详细内容 →

Honda Accord (1988) Front Bumper

Nghia Pham 发布

Honda Accord (1988) Front Bumper

Here's how to remove the bumper. Remove the signal lights and disconnect the wiring. Remove the metal tapping screws under the fender by wheel well. Remove the two lower bumper mount bolts. Remove the top two screws by the headlights then remove the bumper.

阅读详细内容 →