Guides — Genesis

Genesis G70 (2020) Front Bumper

Joni Pham 发布

Genesis G70 (2020) Front Bumper

Here's how to remove the front bumper cover. Remove the (4) push pins holding the bottom portion. Both side of the wheel well, remove the 8mm screw by the fender. Open hood to remove the upper grill cover to expose the screws that hold the top portion of the bumper. Note: There are tabs all long the upper part holding the bumper to the car. Final step is to begin pulling the bumper apart from the fender. With an upward motion of better avoid breaking the fragile tabs. 

阅读详细内容 →

Genesis G70 (2020) Rear Bumper

Joni Pham 发布

Genesis G70 (2020) Rear Bumper

Here's how to remove the rear bumper cover. 1. Underneath the car by the two exhausts, undo the two bottom plastic clips. 2. At the wheel wells start unclipping both corners. 3. Open trunk lid then remove the two black plastic covers along the top edge of the bumper. Remove the two horizontal and two vertical screws. 4. Then finish unclipping the bumper cover and pull away from the car body.

阅读详细内容 →