Guides — e90

BMW 328i E90 (2007) Rear Bumper Cover

Nghia Pham 发布

BMW 328i E90 (2007) Rear Bumper Cover

Prep:Remove the (3) 8mm screws of the rear fender liners so later we can locate the screws holding the bumper.Remove both tail lights. Here's how to remove the rear bumper. Open trunk and locate the two taps that's hiding the screws holding the bumper. Remove the (11) screws holding the bottom portion. Both sides, nudge the fender liner aside to locate the bolt holding the side edge.  Final step is to gently pry each tab to free the bumper. And don't forget to disconnect any parking sensor connectors.

阅读详细内容 →

BMW 328i E90 (2007) Front Bumper Cover

Nghia Pham 发布

BMW 328i E90 (2007) Front Bumper Cover

Prep:Remove screws that attach the fender liner to the bumper.If you have headlamp washers, remove the hoses from the injectors. Here's how to remove the front bumper. Remove the (7) screws at the bottom. Peel the edge of the fender liner to expose the screw that hold the bumper. Remove the screws for both sides. Now open the hood and remove the (4) bolt that hold the upper part. Make sure to disconnect the fog lights connector.

阅读详细内容 →