Genesis G70 (2020) Front Bumper
由 Joni Pham 在 发布
Here's how to remove the front bumper cover.
- Remove the (4) push pins holding the bottom portion.
- Both side of the wheel well, remove the 8mm screw by the fender.
- Open hood to remove the upper grill cover to expose the screws that hold the top portion of the bumper.
- Note: There are tabs all long the upper part holding the bumper to the car.
- Final step is to begin pulling the bumper apart from the fender. With an upward motion of better avoid breaking the fragile tabs.