BMW X6 - F16 (2015 – 2019) Front Bumper Removal

由 Quan Nguyen 在 2020年2月20日 发布

Here's how to remove the front bumper cover.

Remove seal (1) and unscrew bolts (2).

Remove rivet (1) and marked screws.Installation note:

Fit new rivet (1).

Note:

Carry out work on the right side in the same way as for the left side illustrated here.

Release wheel arch trim (1) from catches in area of bumper trim panel.

Partially release wheel arch cover and fold it aside.

Unfasten screws (2).

Detach bumper trim panel from side panel at the side.

Note:

Carry out work on the right side in the same way as for the left side illustrated here.

Release screws (1).

Lift bumper trim panel (1) over guide (2).

Pull bumper panel (1) slightly towards the front with aid of a 2nd person.

Unfasten and disconnect all electrical connectors and, if necessary, headlight washer system connection.

Remove the bumper panel (1).

分享此文章

发表评论 ›