BMW X4 - G02 (2018 – present) Rear Bumper Removal

Quan Nguyen 发布

Here's how to remove the rear bumper cover.

Preliminary Work
▶ Remove the flap in the luggage compartment trim panel on the right
GRA-PIX-GRRB-51-056-67
Pull the handle (1).
Remove the flap in the luggage compartment trim panel (2).
▶ Remove flap in luggage compartment trim panel on right
GRA-PIX-GRRB-51-056-15
Pull the handle (1).
Take off flap in the luggage compartment trim panel (2).
GRA-PIX-GRRB-51-047-59
Open bracket and remove warning triangle (1).
▶ Remove the lower D‐pillar trim panel
GRA-PIX-GRRB-51-056-76
Loosen screws (1).
EGR-EGR-GRSW0093-10
Have the set of special tools 0 493 752 (00 9 329) ready.
GRA-PIX-GRRB-51-056-77
Position a suitable special tool between the tailgate seal and the lower D-pillar trim panel (1).
Release the latch mechanism (2) and unclip the clip (3).
Guide out the lower D-pillar trim panel (1) under the sealing lip on the tailgate seal, release it from the guides (4) and remove it to the top.
GRA-PIX-GRRB-51-056-78
Release and detach the Bowden cable (1) on the bottom D-pillar trim panel (2) in direction of arrow.
Remove the bottom D-pillar trim panel (2).
▶ Remove the rear light on the side panel
GRA-PIX-GRRB-63-013-43
Remove the plug (1).
Unlock plug connection (2) and disconnect.
GRA-PIX-GRRB-63-013-44
Loosen nuts (1).
GRA-PIX-GRRB-63-013-45
Remove the rear light on the side panel (1) in direction of arrow.
GRA-PIX-GRRB-63-012-20
Unclip the clip (1) with the special tool 2 298 505 .
Remove the trim in the water channel (2) upwards.
Release rear reflector (1) at the clamp (2) using a suitable tool.
Remove the rear reflector (1) in direction of arrow.
GRA-PIX-GRRB-51-056-73
Unlock and disconnect plug connection (1) on the rear reflector (2).
Main Work
GRA-PIX-GRRB-51-052-49
Loosen screws (1).
GRA-PIX-GRRB-51-053-00
Loosen blind rivet(1).
GRA-PIX-GRRB-51-052-55
NOTICE
Perform the operations on the left and right side.
Release wheel arch trim (1) in area of bumper panel from latch mechanisms .
Unclip wheel arch trim (1) from clip (2).
GRA-PIX-GRRB-51-052-51
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
GRA-PIX-GRRB-51-052-50
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Release bumper panel (2) at top from latch mechanisms in area of side panel and remove towards rear.
Disconnect plug connections and put down bumper panel (2).

分享此文章



← 较旧的文章 较新的文章 →


0 条评论

发表评论