BMW X3 - G01 (2018 – present) Rear Bumper Removal

Quan Nguyen 发布

Here's how to remove the rear bumper cover.

Preliminary Work
GRA-PIX-GRRB-51-047-29
Pull the handle (1).
Remove the flap (2) in the luggage compartment trim panel.
GRA-PIX-GRRB-51-047-31
Pull the handle (1).
Take off flap (2) in luggage compartment trim panel.
▶ Remove the rear light on the side panel
GRA-PIX-GRRB-63-012-19
Open the holder (3) of the warning triangle (1) and remove the warning triangle (1).
Release the screw (2) and remove the holder (3)of the warning triangle (1).
GRA-PIX-GRRB-63-012-20
Unclip the clip (1) with the special tool 2 298 505 .
Unclip the cover (2) from the water channel.
GRA-PIX-GRRB-63-012-21
RISK OF DAMAGE
Scratches.
Tools and sharp-edged components can cause scratches.
Protect working area.
Handle tools and components carefully.
Protect the body in the area of the rear light (3) with adhesive tape.
Release the screw (1) of the rear light (3).
Loosen the nuts (2) of the rear light (3).
GRA-PIX-GRRB-63-012-22
Remove the rear light (1) towards the rear and unlock and disconnect the plug connection (2).
GRA-PIX-GRRB-63-013-04
Unclip the rear reflector (1) with special tool 0 496 571 (00 9 327) from the bumper panel (2) in direction of arrow.
Main Work
GRA-PIX-GRRB-51-052-49
Loosen screws (1).
GRA-PIX-GRRB-51-053-00
Loosen blind rivet(1).
GRA-PIX-GRRB-51-052-55
NOTICE
Perform the operations on the left and right side.
Release wheel arch trim (1) in area of bumper panel from latch mechanisms .
Unclip wheel arch trim (1) from clip (2).
GRA-PIX-GRRB-51-052-51
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
GRA-PIX-GRRB-51-052-50
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Release bumper panel (2) at top from latch mechanisms in area of side panel and remove towards rear.
Disconnect plug connections and put down bumper panel (2).

分享此文章



← 较旧的文章 较新的文章 →


0 条评论

发表评论