BMW X2 - F39 (November 2017 – Present) Front Bumper Removal

Quan Nguyen 发布

Here's how to remove the front bumper cover.

Preliminary Work
▶ Remove the bonnet seal on the side
GRA-PIX-GRRB-51-052-38
Unclip the side bonnet seal (1) from the outer latch mechanisms (2) and the inner latch mechanism (3).
Feed out the side bonnet seal (1) from the guide (4) and remove.
Removing the seal for the front centre bonnet
GRA-PIX-GRRB-51-052-39
Remove the seal for the front centre bonnet (1) towards the top.
▶ Partially removing the front wheel arch trim
GRA-PIX-GRRB-51-052-71
Loosen blind rivet(1).
Release front wheel arch trim in the area of the bumper panel from the latch mechanisms (2) and from the clip (3).
▶ Partially remove the front wheel arch cover
GRA-PIX-GRRB-51-052-72
Loosen screw (1).
Release the blind rivet (2).
Fold back the front wheel arch cover (3).
Remove temperature sensor
GRA-PIX-GRRB-65-008-68
Unclip temperature sensor (1) from front bumper panel (2).
Main Work
Remove front bumper panel
GRA-PIX-GRRB-51-052-75
Loosen screws (1).
GRA-PIX-GRRB-51-052-73
Loosen screws (1).
GRA-PIX-GRRB-51-052-74
Loosen screws (1).
Loosen screws (2).
GRA-PIX-GRRB-63-012-92
Pull the front bumper panel slightly forward with the help of another person.
Unlock and disconnect the plug connections (1) on the fog lights.
Remove the front bumper panel.

分享此文章



← 较旧的文章 较新的文章 →


0 条评论

发表评论