BMW 8 Series Second generation - G14/G15/G16 (2018 – present) Front Bumper Removal

Quan Nguyen 发布

Here's how to remove the front bumper cover.

Preliminary Work
1 – Removing the centre engine compartment cover
GRA-PIX-GRRB-51-059-01
Loosen the expanding rivet (1).
Loosen the clips (2).
Remove the cover in the engine compartment at centre towards the top.
2 – Remove centre radiator ornamental grille
GRA-PIX-GRRB-51-059-02
Loosen screw (1).
Release the centre front ornamental grille from the latch mechanisms (2).
Release the centre front ornamental grille from the remaining latch mechanism towards the front and remove it.
3 – Removing both front wheel arch covers (front section)
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Description is for left component only. Procedure on the right side is identical.
▶ Removing the front section of the front wheel arch cover
GRA-PIX-GRRB-51-059-83
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
To provide a better overview: Schematic diagram with partially hidden components.
Remove screws (arrows).
Remove the front section of the front wheel arch cover (1) together with the brake air duct (2).
GRA-PIX-GRRB-51-059-84
Replacement:
Loosen screw (1).
Remove the brake air duct (2).
4 – Partially removing the temperature sensor
GRA-PIX-GRRB-65-009-23
Unclip temperature sensor (1) from the front bumper panel to the top.
5 – Removing front bumper panel
GRA-PIX-GRRB-51-059-04
Loosen the expanding rivet (1).
Loosen screws (2).
GRA-PIX-GRRB-51-059-05
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Release the bumper panel, front on the side at the latch mechanism (2) and remove from the guide in the direction of the arrow.
GRA-PIX-GRRB-51-059-06
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Perform the operations on the left and right side.
Unlock plug connection (1) and disconnect.
Remove plug connection (1) from holder (2).
Unclip the vehicle wiring harness with the bracket (3).
GRA-PIX-GRRB-51-059-07
Release the bumper panel, front from the latch mechanisms (1) towards the front.
Slightly pull the bumper panel towards the front and if necessary, unlock and disconnect additional plug connections.
Remove front bumper panel towards front.

分享此文章



← 较旧的文章 较新的文章 →


0 条评论

发表评论