BMW 6 Series Fourth generation - G32 (2017 – present) Front Bumper Removal

Quan Nguyen 发布

Here's how to remove the front bumper cover.
1 – Remove front ornamental grille
GRA-PIX-GRRB-51-049-19
Fasten front ornamental grille (1) in the lower area and unclip it.
Unclip the upper latch mechanisms (2) by swivelling to the top.
Avoid contact between front ornamental grille (1) and bumper panel!
Pull off front ornamental grille (1) to the front.
2 – Partially remove the front section of the front wheel arch cover
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
To provide a better overview: Schematic diagram with partially hidden components.
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Description is for left component only. Procedure on the right side is identical.
GRA-PIX-GRRB-66-002-17
Remove screws (arrows).
Fold the wheel arch cover (1) to the side.
Main Work
3 – Remove front bumper panel
GRA-PIX-GRRB-51-049-56
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Detach the bumper panel (2) from the latch mechanism (3).
GRA-PIX-GRRB-51-049-58
Loosen screws (1).
GRA-PIX-GRRB-51-035-68
Unlock plug connection (1) on the right and disconnect.
Remove plug connection (1) from holder (2).
Unlock and disconnect the hose for the headlight cleaning system.
Place the hose to the top and secure it to prevent fluid from leaking.
GRA-PIX-GRRB-51-049-59
Release the bumper panel from the latch mechanisms (1) toward the front.
Pull the bumper panel slightly forward and disconnect any other plug connections as needed.
Remove bumper panel  towards front.
4 – Installing the front bumper panel

分享此文章



← 较旧的文章 较新的文章 →


0 条评论

发表评论