BMW 4 Series First generation - F32/F33/F36 (2013–present) Rear Bumper Removal

由 Quan Nguyen 在 2020年3月2日 发布

Here's how to remove the rear bumper cover.

Release screws (1) on wheel arch cover (2) on left/right.

Fold back wheel arch cover (1).

Release screw (2).

Except for F80/F82:

Release screws (1).

Only F80/F82:

Release screws (1).

Release screw (1).

Note:

Carry out work on the right side in the same way as for the left side illustrated here.

Note:

The following tasks must be carried out with a second person assisting:

Unclip the bumper panel (1) in the area (2) left/right outward.

Unclip bumper panel (1) in area (3) toward the rear.

If necessary, disconnect the plug connections of the ultrasonic sensors and remove the bumper panel (1).

Installation note:

Latch mechanisms in this area (2 and 3) must be routed correctly into the corresponding holders.

分享此文章

发表评论 ›

Excellent post. I’m going through a few of these issues as well..

viagra active ingredient viagra what does it do viagra pill

2020年11月25日 上的 RobertDycle