BMW 1 Series - F40 (2019–present) Rear Bumper Removal

Quan Nguyen 发布

Here's how to remove the rear bumper cover.

1 – Removing both trims for water channel

Description is for left component only. Procedure on the right side is identical.
▶ Removing trim for water channel
GRA-PIX-GRRB-63-012-81
Detach rotary clip (1).
Feed out and remove trim for water channel (2) from guides (3).
2 – Remove both rear lights from the side panel

Description is for left component only. Procedure on the right side is identical.
▶ Remove the rear light on the side panel
GRA-PIX-GRRB-63-012-80

Schematic diagram is for example purposes. Some parts may differ in certain details.
Mask the body in area (1) with a plastic adhesive tape.
GRA-PIX-GRRB-63-015-35
Loosen nut (1).
Loosen screw (2).
GRA-PIX-GRRB-63-015-36
Unclip the tail lights on the side panel (1) from the guides (3) towards the rear.
Feed out the tail lights on the side panel (1) from the guides (2) towards the rear.
GRA-PIX-GRRB-63-015-37

Observe note on unlocking and disconnecting plug connections.
For additional information see: 6113 ... Unlocking and disconnecting different plug connections
Unlock and disconnect plug connection (1) as described in position #28 in additional information.
Unclip cable clip (2).
Remove tail lights on the side panel (3).
3 – Partially remove both rear sides of rear trim panel

Description is for left component only. Procedure on the right side is identical.
GRA-PIX-GRRB-51-073-70
Loosen plastic nuts (1).
Loosen screws (2).
Partially loosen rear part of the wheel arch cover (3).
4 – Remove rear bumper panel
GRA-PIX-GRRB-51-073-80

Perform the operations on the left and right side.
Loosen screw (1).
GRA-PIX-GRRB-51-073-81

Perform the operations on the left and right side.
Loosen screw (1).
GRA-PIX-GRRB-51-073-83
Loosen screws (1).
GRA-PIX-GRRB-51-073-94
Release rear bumper panel (1) at top from latch mechanisms (2).
Release rear bumper panel (1) from remaining latch mechanisms and pull away towards rear.

分享此文章



← 较旧的文章 较新的文章 →


0 条评论

发表评论