Acura RDX 2020 Front Bumper Removal

Nghia Pham 发布

Here's how to remove the front bumper cover.

  1. Underneath the car remove the (2) screws and (7) plastic clips that hold the bottom part.
  2. On both sides of the wheel well, peel away the fender liners then remove the screws that hold the edges. 
  3. Then open the hood to remove the (6) screws that hold the top portion of the bumper.
  4. By the headlights area, now start unclipping the bumper. Also gently remove unclip the side tabs.
  5. Final step is to pull back the bumper and disconnect the harness.

Acura_RDX_2020_front_diagram

 


分享此文章



← 较旧的文章 较新的文章 →


1 条评论

  • TLHCEDQb

    上的 PnvLqyDa

发表评论