Acura NSX 2020 Front Bumper Removal

Nghia Pham 发布

Prep:
Remove front wheels to have access to the wheel well fenders.

Here's how to remove the front bumper cover.

  1. Remove (3) fender liner plastic clips from both left and right hand wheels arches.
  2. Gently Pull fender liner back then remove (3) T30 bolts that secured the bumper side edges.
  3. Underneath the car, remove (24) T30 bolts that holds the bumper to skid guards & supports, then remove the (4) screws across the top of the bumper (located under Hood).
  4. Pull out the bumper at the wheel arch area to release it from the hooks.
  5. Final step is to disconnect the sensors wire.

分享此文章



← 较旧的文章 较新的文章 →


1 条评论

  • https://www.eyeofthekiger.org/post/how-to-remove-2018-acura-nsx-front-bumper

    上的 Rino

发表评论