BMW X3 E83 (2007) Rear Bumper Cover

投稿者 :Nghia Pham on

Tools: Socket 8mm, 


  1. Both sides, remove 2 bottom screws on the rear fender liner. 
  2. Here's how to remove the rear bumper.
  3. Separate the liner to remove the 2 screws holding the bumper far sides.
  4. In the top corner of same area, remove the T25 hex screw. Both sides.rear_corner
  5. By the exhaust another 8mm screw holding the bottom.
    And the final two 10mm screws connected to the impact bar.rear-exhaust


← 投稿順 新着順 →