BMW 4 Series First generation - F32/F33/F36 (2013–present) Front Bumper Removal

投稿者：Quan Nguyen on 2020年3月2日

Here's how to remove the front bumper cover.

Installation note:
Feed bumper panel (1) correctly into clamps (2).

Release screws (1) and expanding rivet, if applicable, on bumper panel (2).

Only F82 GTS:

Loosen the screw (1) on the front splitter adapter (2).

Release screws (1) on wheel arch cover (2) on left/right.

Lift out wheel arch cover (2) at side.

Installation note:

Make sure wheel arch cover (2) is in correct position.

Release screws (1) on left/right.

Note:

The following tasks must be carried out with a second person assisting:

Pull bumper panel (2) forwards a little.

Unlock and detach plug connections on the following components depending on the version.

If necessary, unlock and detach hose pipe for headlight cleaning system and lay down on top.

Remove bumper panel (2) towards front.

Version with M Aerodynamics package:

Unfasten mount (1) from catch (2).

Remove bumper trim panel forwards.

この投稿をシェアする