BMW 318i E36 (1994) Rear Bumper

投稿者 :Joni Pham on

  1. Underneath the car, remove the panel that's attached to the bumper. Then remove the screws holding the bottom portion.
  2. At the right and left rear wheel wells, remove rivets and screws that hold the bumper to the chassis.

Tips: Remove the 4 nuts in the trunk [that hold impact absorbers] along with the bumper. Once the bumper is off the car with the impact absorbers attached, then you can have direct access to the outside bolts as needed.


この投稿をシェアする



← 投稿順 新着順 →


2件のコメント

  • https://youtu.be/BlbTwjBMoMk

    Yoshi on
  • https://www.pelicanparts.com/bmw/techarticles/JF-Tech/BMW_E36_3_Series_bumper_removal.htm

    Missy on

コメントを残す