Acura NSX 2020 Front Bumper Removal

投稿者 :Nghia Pham on

Remove front wheels to have access to the wheel well fenders.

Here's how to remove the front bumper cover.

  1. Remove (3) fender liner plastic clips from both left and right hand wheels arches.
  2. Gently Pull fender liner back then remove (3) T30 bolts that secured the bumper side edges.
  3. Underneath the car, remove (24) T30 bolts that holds the bumper to skid guards & supports, then remove the (4) screws across the top of the bumper (located under Hood).
  4. Pull out the bumper at the wheel arch area to release it from the hooks.
  5. Final step is to disconnect the sensors wire.


← 投稿順 新着順 →



    Rino on