Toyota Camry (1996) Front Bumper

Publié par Nghia Pham le

1. Remove the RH and LH front fender splash shield screws. Remove the RH and LH front fender splash shields. Remove the four front fender brace screws.

2. Remove the two front fender brace nuts. Remove the two plastic screws. Remove the seven clip buttons located under the front bumper cover.

3. Remove the RH and LH front turn signal lamps. Remove the four front bumper cover brace bolts.

4. Remove the two front turn signal lamp wire harnesses from the front bumper.

5. Remove the eight front bumper bolts. Remove the front bumper from the vehicle.


Partager ce message



← Message plus ancien Message plus récent →


Laisser un commentaire