BMW X5 - G05 (2018 – present) Front Bumper Removal
Publié par Quan Nguyen le
Here's how to remove the front bumper cover.
Preliminary Work
Undo front ornamental grille (1) out of latch mechanisms (2).
Release front ornamental grille (1) forwards from the remaining latch mechanisms.
Disconnect any plug connection and remove front ornamental grille (1).
▶ Partially removing the front wheel arch trim
Release wheel arch trim (1) in area of bumper panel from latch mechanisms (2).
Remove screws (arrows).
Guide out the front section of wheel arch cover (1) partially.
Main Work
Loosen screws (1).
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Release bumper panel (2) from the latch mechanisms in the downward direction.
Unlock plug connection (1) in the left wheel arch and disconnect it.
Unlock the plug connection (1) in the right wheel arch and disconnect.
Loosen screws (1).
Release bumper panel (2) from the latch mechanisms in the area of the dotted line.
Guide out bumper panel (2) forwards and remove it.
Partager ce message
← Message plus ancien Message plus récent →