BMW X3 E83 (2007) Rear Bumper Cover

Publié par Nghia Pham le

Tools: Socket 8mm, 

Prep:

  1. Both sides, remove 2 bottom screws on the rear fender liner. 
  2. Here's how to remove the rear bumper.
  3. Separate the liner to remove the 2 screws holding the bumper far sides.
  4. In the top corner of same area, remove the T25 hex screw. Both sides.rear_corner
  5. By the exhaust another 8mm screw holding the bottom.
    And the final two 10mm screws connected to the impact bar.rear-exhaust

Partager ce message



← Message plus ancien Message plus récent →


Laisser un commentaire