BMW 328i E90 (2007) Rear Bumper Cover

Publié par Nghia Pham le

Prep:
Remove the (3) 8mm screws of the rear fender liners so later we can locate the screws holding the bumper.
Remove both tail lights.

Here's how to remove the rear bumper.

  1. Open trunk and locate the two taps that's hiding the screws holding the bumper.
  2. Remove the (11) screws holding the bottom portion.
  3. Both sides, nudge the fender liner aside to locate the bolt holding the side edge. 
  4. Final step is to gently pry each tab to free the bumper. And don't forget to disconnect any parking sensor connectors.

bmw_e90_rear


Partager ce message



← Message plus ancien Message plus récent →


  • https://remont-bampera.com/en/bmw-3-series-e90

    Brian le
  • https://youtu.be/KY8xIcUPA58

    Jon le

Laisser un commentaire