Acura RDX 2020 Rear Bumper Removal

Publié par Nghia Pham le

Here's how to remove the rear bumper cover.

  1. Open rear gate and locate the plastic covers that's hiding the two screws holding the upper part of the bumper.
  2. On the side rear fenders, remove screws to the liners where you can find the (3) screws holding edges of the bumpers.
  3. There's three bottom screws at the bottom.
  4. Gently pry the sides and with assistance slow remove the bumper and disconnect the parking sensors harness.


Partager ce message

← Message plus ancien Message plus récent →

Laisser un commentaire