Acura RDX 2020 Front Bumper Removal

Publié par Nghia Pham le

Here's how to remove the front bumper cover.

  1. Underneath the car remove the (2) screws and (7) plastic clips that hold the bottom part.
  2. On both sides of the wheel well, peel away the fender liners then remove the screws that hold the edges. 
  3. Then open the hood to remove the (6) screws that hold the top portion of the bumper.
  4. By the headlights area, now start unclipping the bumper. Also gently remove unclip the side tabs.
  5. Final step is to pull back the bumper and disconnect the harness.



Partager ce message

← Message plus ancien Message plus récent →


    PnvLqyDa le

Laisser un commentaire