Toyota Sienna - XL20 (2003–2009) Rear Bumper Removal

Posted by Quan Nguyen on

Here's how to remove the Rear bumper cover.

1. REMOVE REAR BUMPER COVER

  1. Put protective tape under the quarter panel.
  2. Partially the fender liner.

    HINT: Do not remove the fender liner completely but partially so that the bumper cover can be removed.

  3. Remove the 2 screws and 8 clips.
  4. Using a screwdriver, disengage the claws and remove the cover.

Share this post



← Older Post Newer Post →


Leave a comment