Toyota Corolla (1985 – 2012) Front Bumper Removal

Posted by Quan Nguyen on

Here's how to remove the Front bumper cover.

1. Remove radiator grille sub–assy

 

  1. Remove the 2 bolts and clip.
  2.  using a screwdriver, remove the radiator grille.

Hint

: tape the screwdriver tip before use.

2. Remove front bumper cover

 

  1. Remove the 6 screws and 2 clips.
  2.  disengage the hook, and remove the front bumper cover.
  3.  w/ fog light: disconnect the fog light connectors.

3. Remove front bumper energy absorber

4. Remove front bumper reinforcement

 

  1. Disconnect the wire harness clamp.
  2.  remove the 4 nuts and front bumper reinforcement.

5. Remove front bumper side mounting bracket lh

6. Remove front bumper side mounting bracket rh

7. Remove front lh spoiler sub–assy (w/ front spoiler)

  1.  remove the screw and 4 retainers.
  2.  disengage the clip and front lh spoiler.
  3.  employ the same manner described above to the other side.

8. Remove front rh spoiler sub–assy (w/ front spoiler)

9. Remove fog light unit lh (w/ fog light)

  1.  remove the nut and fog light unit.
  2.  employ the same manner described above to the other side.

10. Remove fog light unit rh (w/ fog light)

11. Remove front bumper hole cover lh (w/o fog light)

12. Remove front bumper hole cover rh (w/o fog light)


Share this post



← Older Post Newer Post →


Leave a comment