Guides — RDX

Acura RDX 2020 Front Bumper Removal

Posted by Nghia Pham on

Acura RDX 2020 Front Bumper Removal

Here's how to remove the front bumper cover. Underneath the car remove the (2) screws and (7) plastic clips that hold the bottom part. On both sides of the wheel well, peel away the fender liners then remove the screws that hold the edges.  Then open the hood to remove the (6) screws that hold the top portion of the bumper. By the headlights area, now start unclipping the bumper. Also gently remove unclip the side tabs. Final step is to pull back the bumper and disconnect the harness.  

Read more →

Acura RDX 2020 Rear Bumper Removal

Posted by Nghia Pham on

Acura RDX 2020 Rear Bumper Removal

Here's how to remove the rear bumper cover. Open rear gate and locate the plastic covers that's hiding the two screws holding the upper part of the bumper. On the side rear fenders, remove screws to the liners where you can find the (3) screws holding edges of the bumpers. There's three bottom screws at the bottom. Gently pry the sides and with assistance slow remove the bumper and disconnect the parking sensors harness.

Read more →