Guides — NSX

Acura NSX 2020 Front Bumper Removal

Posted by Nghia Pham on

Acura NSX 2020 Front Bumper Removal

Prep:Remove front wheels to have access to the wheel well fenders. Here's how to remove the front bumper cover. Remove (3) fender liner plastic clips from both left and right hand wheels arches. Gently Pull fender liner back then remove (3) T30 bolts that secured the bumper side edges. Underneath the car, remove (24) T30 bolts that holds the bumper to skid guards & supports, then remove the (4) screws across the top of the bumper (located under Hood). Pull out the bumper at the wheel arch area to release it from the hooks. Final step is to disconnect the sensors...

Read more →

Acura NSX 2020 Rear Bumper Removal

Posted by Nghia Pham on

Acura NSX 2020 Rear Bumper Removal

Prep:Held in by eight bolts, remove the lower diffuser. Here's how to remove the rear bumper cover. Remove (2) bolts from inside the wheel-wells on each side. Pulling on each corner, unsnap fasteners to pull the bumper off.

Read more →