Guides — e83

BMW X3 E83 (2007) Rear Bumper Cover

Posted by Nghia Pham on

BMW X3 E83 (2007) Rear Bumper Cover

Tools: Socket 8mm,  Prep: Both sides, remove 2 bottom screws on the rear fender liner.  Here's how to remove the rear bumper. Separate the liner to remove the 2 screws holding the bumper far sides. In the top corner of same area, remove the T25 hex screw. Both sides. By the exhaust another 8mm screw holding the bottom. And the final two 10mm screws connected to the impact bar.

Read more →

BMW X3 E83 (2007) Front Bumper Cover

Posted by Nghia Pham on

BMW X3 E83 (2007) Front Bumper Cover

Prep: If you have headlamp washers, remove the injector and the cover. Now locate the fog lamps, remove trim in the doorway. Unscrew the screws for the plates. Unscrew the screws around the perimeter at the bottom. Here’s how to remove the bumper: Remove the top plastic shield above the kidney grill. There’s three screws that holds the top of the bumper. Remove front wheels to access behind the fender’s liner.  Two hex and one rivet holding the liner. Under the headlight, remove T-25 hex screw located behind the liner that hold the top right corner of the bumper. Under...

Read more →