Guides — e70

BMW X5 E70 Rear Bumper Cover

Posted by Nghia Pham on

BMW X5 E70 Rear Bumper Cover

Prep: Rear wheel arch, remove the plastic rivets holding the liner outer edges. Remove tail lights and reflector lights. Here's how to remove the rear bumper. Using plastic pry tool, peel back the wheel well molding to locate screws holding the bumper. Repeat on opposite side. The bottom portion is held together by (6) screws. Remove the screws behind the reflectors. The entire bumper's top portion is held by clips. So gently unclip and separate starting from tail light.

Read more →

BMW X5 E70 Front Bumper Cover

Posted by Nghia Pham on

BMW X5 E70 Front Bumper Cover

Prep: remove the (4) screws holding the skid plate at the bottom of bumper. Here's how to remove the bumper. Front of the radiator, open hood and locate the (5) screws holding the bumper's top portion. Gently peel back the liners to locate and remove the screws holding the two sides. Now bumper should only be held by clips. So start unclipping the top portion underneath headlights. To make unclipping easier, remove the two grills by fog lights.  

Read more →