Guides — camry

Toyota Camry (2020) Rear Bumper

Posted by Micki Stone on

Toyota Camry (2020) Rear Bumper

Here's how to remove the rear bumper cover. 1. In the wheel wells, remove both mud flaps.  2. Open trunk lid then remove the black plastic covers hiding the  T10 Torx fasteners that holds the top of the bumper. 3. Remove the 4 plastic clips holding the bottom bumper. 4. Start unclipping the bumper from all sides and also unplug the parking sensors connector.

Read more →

Toyota Camry (2020) Front Bumper

Posted by Micki Stone on

Toyota Camry (2020) Front Bumper

Prep: Open the hood and remove the upper grill cover. Here's how to remove the front bumper. Underneath the car, remove the 10mm screws holding the bottom portion of the bumper. Both right and left side edges, by the fender, remove the screws. Now go back to the top of the grill and remove all the screws. Final step is to gently pry the bumper away from the car and don't forget to unplug the fog lights connectors.

Read more →

Toyota Camry (1996) Rear Bumper

Posted by Nghia Pham on

Toyota Camry (1996) Rear Bumper

Prep:Remove both left and right hand side luggage trims. Here's how to remove the bumper. Remove the 7 clips, 2 bolts, and 6 nuts then pull bumper away from the vehicle.

Read more →

Toyota Camry (1996) Front Bumper

Posted by Nghia Pham on

Toyota Camry (1996) Front Bumper

1. Remove the RH and LH front fender splash shield screws. Remove the RH and LH front fender splash shields. Remove the four front fender brace screws. 2. Remove the two front fender brace nuts. Remove the two plastic screws. Remove the seven clip buttons located under the front bumper cover. 3. Remove the RH and LH front turn signal lamps. Remove the four front bumper cover brace bolts. 4. Remove the two front turn signal lamp wire harnesses from the front bumper. 5. Remove the eight front bumper bolts. Remove the front bumper from the vehicle.

Read more →