Guides — bmw

BMW X3 - G01 (2018 – present) Front Bumper Removal

Posted by Quan Nguyen on

BMW X3 - G01 (2018 – present) Front Bumper Removal

Here's how to remove the front bumper cover. Preliminary Work Undo front ornamental grille (1) out of latch mechanisms (2). Release front ornamental grille (1) from remaining latch mechanisms to front and remove. ▶ Partially removing the front wheel arch trim Loosen blind rivet(1). Release wheel arch trim in the area of the bumper panel from the latch mechanisms (2) and from the clip (3). ▶ Partially remove the front section of the front wheel arch cover Loosen screws (1). Fold back the wheel arch cover (2). Main Work Loosen screws (1). NOTICE Perform the operations on the left and...

Read more →

BMW X3 - G01 (2018 – present) Rear Bumper Removal

Posted by Quan Nguyen on

BMW X3 - G01 (2018 – present) Rear Bumper Removal

Here's how to remove the rear bumper cover. Preliminary Work Pull the handle (1). Remove the flap (2) in the luggage compartment trim panel. Pull the handle (1). Take off flap (2) in luggage compartment trim panel. ▶ Remove the rear light on the side panel Open the holder (3) of the warning triangle (1) and remove the warning triangle (1). Release the screw (2) and remove the holder (3)of the warning triangle (1). Unclip the clip (1) with the special tool 2 298 505 . Unclip the cover (2) from the water channel. RISK OF DAMAGE Scratches. Tools and...

Read more →

BMW X4 - G02 (2018 – present) Front Bumper Removal

Posted by Quan Nguyen on

BMW X4 - G02 (2018 – present) Front Bumper Removal

Here's how to remove the front bumper cover. Preliminary Work Engine compartment lid is open. Undo front ornamental grille (1) out of latch mechanisms (2). Release front ornamental grille (1) from remaining latch mechanisms to front and remove. ▶ Partially removing the front wheel arch trim Loosen blind rivet(1). Release wheel arch trim in the area of the bumper panel from the latch mechanisms (2) and from the clip (3). ▶ Partially remove the front section of the front wheel arch cover Loosen screws (1). Fold back the wheel arch cover (2) Main Work Loosen screws (1). NOTICE Perform the...

Read more →

BMW X4 - G02 (2018 – present) Rear Bumper Removal

Posted by Quan Nguyen on

BMW X4 - G02 (2018 – present) Rear Bumper Removal

Here's how to remove the rear bumper cover. Preliminary Work ▶ Remove the flap in the luggage compartment trim panel on the right Pull the handle (1). Remove the flap in the luggage compartment trim panel (2). ▶ Remove flap in luggage compartment trim panel on right Pull the handle (1). Take off flap in the luggage compartment trim panel (2). Open bracket and remove warning triangle (1). ▶ Remove the lower D‐pillar trim panel Loosen screws (1). Have the set of special tools 0 493 752 (00 9 329) ready. Position a suitable special tool between the tailgate seal...

Read more →

BMW X5 - G05 (2018 – present) Front Bumper Removal

Posted by Quan Nguyen on

BMW X5 - G05 (2018 – present) Front Bumper Removal

Here's how to remove the front bumper cover. Preliminary Work Undo front ornamental grille (1) out of latch mechanisms (2). Release front ornamental grille (1) forwards from the remaining latch mechanisms. Disconnect any plug connection and remove front ornamental grille (1). ▶ Partially removing the front wheel arch trim Release wheel arch trim (1) in area of bumper panel from latch mechanisms (2). Remove screws (arrows). Guide out the front section of wheel arch cover (1) partially. Main Work Loosen screws (1). NOTICE Perform the operations on the left and right side. Loosen screws (1). Release bumper panel (2) from...

Read more →