Guides — Aero

Saab 9000 Aero 1997 Front Bumper Removal

Posted by Quan Nguyen on

Saab 9000 Aero 1997 Front Bumper Removal

Here's how to remove the front bumper cover. Move ALL the 10mm nuts that hold the Black plastic under tray parts to the bumper and the chassis. Pull off all the Black plastic under tray parts. Remove power connectors for Fog lights. Remove the front Indicators. Note: there are some 10mm nuts along the side (behind the indicator area) that hold the side of the bumper to the inner wing. Finally, laying under the car, you will see two large 17mm bolts on the front that hold the bumper assembly to the main front beam. Undo and pull these 2...

Read more →

Saab 9000 Aero 1997 Rear Bumper Removal

Posted by Quan Nguyen on

Saab 9000 Aero 1997 Rear Bumper Removal

Here's how to remove the rear bumper cover. With the hatchback open, roll the carpet away in the corners under the lighting clusters. In each corner, you'll see a reinforcing bracket - with a stud/nut between the side flanges: That is the upper mounting stud for the bumper frame. Also, directly below the bracket you'll see a foam backed rectangular cap that sits flush with the trunk floor. Pop the cap and in the recess below the floor you'll see another stud fastened with a nut: That is the lower bumper frame mounting stud. Use a 17 mm socket (doesn't...

Read more →