Mercedes-Benz CLK-Class (1997–2003) Front Bumper Removal

Posted by Quan Nguyen on

Here's how to remove the front bumper cover.

1.Safely raise the front end. Remove wheels if you want good access.
2. Remove lower front fender liners and lower grills.
3. Remove the fender to bumper sandwich clamp by removing the bolt at the rear end and then pull /lever it out.
4.Disconnect the electrical connections to the fog lights and the temperature sensor.
5.There is no need to disconnect the fluid supply lines to the headlight washers as they are not mounted to the bumper cover.
6.Remove the 8mm mounting bolts (front facing ) near the fog lights.
7.Remove the 8mm mounting bolts ( up facing ) near the main grill. A magnet is helpful to retrieve them.
8.Remove the two screws from the grill top mount bracket.
9.Pull the bumper out and place it on the ground.
10. Remove clamp from Parktronic sensor harness and disconnect it.
11. The grill can be removed from the bumper cover simply by pushing plastic tabs aside and pulling it out.


Share this post



← Older Post Newer Post →


2 comments

  • zSbtNCxZHRw

    xDsgTUaFivmNrjnB on
  • CjMfoYWZaFczLN

    VhFjArlOyfKicRN on

Leave a comment