Genesis G70 (2020) Front Bumper

Posted by Joni Pham on

Here's how to remove the front bumper cover.

  1. Remove the (4) push pins holding the bottom portion.
  2. Both side of the wheel well, remove the 8mm screw by the fender.
  3. Open hood to remove the upper grill cover to expose the screws that hold the top portion of the bumper.
  4. Note: There are tabs all long the upper part holding the bumper to the car.
  5. Final step is to begin pulling the bumper apart from the fender. With an upward motion of better avoid breaking the fragile tabs. 

Share this post



← Older Post Newer Post →


Leave a comment