BMW X7 - G07 (2018 – Present) Front Bumper Removal

Posted by Quan Nguyen on

Here's how to remove the front bumper cover.

Removing the number plate baseplate for number plate at front
GRA-PIX-GRRB-51-068-04
For US version and Japanese version:
Loosen screws (1).
Unhook the licence plate (2) from the guides and remove.
GRA-PIX-GRRB-51-068-05
For Chinese version:
Loosen screws (1).
Unhook the licence plate (2) from the guides and remove.
GRA-PIX-GRRB-51-068-03
For European version
Loosen screws (1).
Detach and remove the number plate baseplate (2) downwards from the guides.
GRA-PIX-GRRB-51-061-79
Undo front ornamental grille (1) out of latch mechanisms (2).
Release front ornamental grille (1) forwards from the remaining latch mechanisms.
Disconnect any plug connection and remove front ornamental grille (1).
GRA-PIX-GRRB-51-060-37
Release wheel arch trim (1) in area of bumper panel from latch mechanisms (2).
GRA-PIX-GRRB-51-061-81
Remove screws (arrows).
Guide out the front section of wheel arch cover (1) partially.
GRA-PIX-GRRB-51-061-84
Loosen screws (1).
GRA-PIX-GRRB-51-061-82
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Release bumper panel (2) from the latch mechanisms in the downward direction.
GRA-PIX-GRRB-51-061-83
Unlock plug connection (1) in the left wheel arch and disconnect it.
GRA-PIX-GRRB-51-061-86
Unlock the plug connection (1) in the right wheel arch and disconnect.
GRA-PIX-GRRB-51-061-85
Loosen screws (1).
Release bumper panel (2) from the latch mechanisms in the area of the dotted line.
Guide out bumper panel (2) forwards and remove it.

Share this post



← Older Post Newer Post →


Leave a comment