BMW X4 - G02 (2018 – present) Front Bumper Removal

Posted by Quan Nguyen on

Here's how to remove the front bumper cover.

Preliminary Work
Engine compartment lid is open.
GRA-PIX-GRRB-51-047-80
Undo front ornamental grille (1) out of latch mechanisms (2).
Release front ornamental grille (1) from remaining latch mechanisms to front and remove.
▶ Partially removing the front wheel arch trim
GRA-PIX-GRRB-51-047-82
Loosen blind rivet(1).
Release wheel arch trim in the area of the bumper panel from the latch mechanisms (2) and from the clip (3).
▶ Partially remove the front section of the front wheel arch cover
GRA-PIX-GRRB-51-047-83
Loosen screws (1).
Fold back the wheel arch cover (2)
Main Work
GRA-PIX-GRRB-51-047-86
Loosen screws (1).
GRA-PIX-GRRB-51-047-84
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Release the bumper panel (2) from the latch mechanisms (3).
Unlock plug connection (4) and disconnect
GRA-PIX-GRRB-51-047-85
Unlock the plug connection (1) in the right wheel arch and disconnect.
Remove plug connection (1) from holder (2)
GRA-PIX-GRRB-51-047-81
Loosen screws (1).
GRA-PIX-GRRB-51-047-87
Release the bumper panel (1) in the area of the top air flap control from the mountings (2).
Remove bumper panel (1) towards front.

Share this post



← Older Post Newer Post →


Leave a comment