BMW X2 - F39 (November 2017 – Present) Rear Bumper Removal

Posted by Quan Nguyen on

Here's how to remove the rear bumper cover.

Preliminary Work
GRA-PIX-GRRB-51-052-15
Remove the expanding rivets (1) and press the wheel arch trim (2) to one side.
▶ Removing trim for water channel
GRA-PIX-GRRB-63-012-81
Detach rotary clip (1).
Feed out and remove trim for water channel (2) from guides (3).
▶ Remove the rear light on the side panel
GRA-PIX-GRRB-63-012-80
Mask the body in area (1) with plastic adhesive tape.
GRA-PIX-GRRB-63-012-82
Loosen the nuts (1) on the rear light (2).
GRA-PIX-GRRB-63-012-83
Remove the rear light (1) from the guides (2) towards the rear.
GRA-PIX-GRRB-63-012-84
Detach cable from guide (1).
Unlock and disconnect the plug connection (2) and remove the rear light .
Main Work
GRA-PIX-GRRB-51-052-14
Loosen screws (1).
GRA-PIX-GRRB-51-052-16
Loosen screws (1) and (2).
GRA-PIX-GRRB-51-052-17
NOTICE
Perform the operations on the left and right side.
Carefully detach side latch mechanisms(2) in direction of arrow.
Carefully detach latch mechanisms in area (3) to the rear.
Pull the bumper panel (1) straight toward the rear in direction of arrow with an auxiliary person.
Unlock all plug connections and disconnect.
Remove the bumper panel (1).

Share this post



← Older Post Newer Post →


Leave a comment