BMW 6 Series Fourth generation - G32 (2017 – present) Rear Bumper Removal

Posted by Quan Nguyen on

Here's how to remove the rear bumper cover.

GRA-PIX-GRRB-51-051-60
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Perform the operations on the left and right side.
Loosen screws (1).
Fold the wheel arch cover (2) to the side.
Loosen screw (3).
GRA-PIX-GRRB-51-051-61
Loosen screws (1).
GRA-PIX-GRRB-51-051-62
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Perform the operations on the left and right side.
Loosen screw (1).
GRA-PIX-GRRB-51-051-63
GRA-SYM-GRCI0000-10-NOTICE
NOTICE
Perform the operations on the left and right side.
Carefully unclip the guide tabs individually beginning in the area (2).
Unclip the guide tabs in the area (3).
Pull the bumper panel (1) straight toward the rear with an auxiliary person.
Unlock all plug connections and disconnect.
Remove the bumper panel (1).

Share this post



← Older Post Newer Post →


Leave a comment