BMW 328i E90 (2007) Front Bumper Cover

Posted by Nghia Pham on

Prep:
Remove screws that attach the fender liner to the bumper.
If you have headlamp washers, remove the hoses from the injectors.

Here's how to remove the front bumper.

  1. Remove the (7) screws at the bottom.
  2. Peel the edge of the fender liner to expose the screw that hold the bumper. Remove the screws for both sides.
  3. Now open the hood and remove the (4) bolt that hold the upper part.
  4. Make sure to disconnect the fog lights connector.

bmw_e9_front


Share this post



← Older Post Newer Post →


2 comments

  • https://youtu.be/nNKWUwSnv0Y

    Binh on
  • https://remont-bampera.com/en/bmw-3-series-e90

    Donna on

Leave a comment