Acura RDX 2020 Front Bumper Removal

Posted by Nghia Pham on

Here's how to remove the front bumper cover.

  1. Underneath the car remove the (2) screws and (7) plastic clips that hold the bottom part.
  2. On both sides of the wheel well, peel away the fender liners then remove the screws that hold the edges. 
  3. Then open the hood to remove the (6) screws that hold the top portion of the bumper.
  4. By the headlights area, now start unclipping the bumper. Also gently remove unclip the side tabs.
  5. Final step is to pull back the bumper and disconnect the harness.

Acura_RDX_2020_front_diagram

 


Share this post



← Older Post Newer Post →


  • TLHCEDQb

    PnvLqyDa on

Leave a comment